Construction Materials

“An Intelligent Way to Insulate”

The arid deserts of Arabia ensure that the scorching sun beats hard on the standing buildings during the day and then a thermal shock for the building in the night when the temperature drops to less than half. If you want your home to be warm in the winter and save on your heating bills, your insulation has one task... to keep the heat in! But if you want your home to stay cool on the warmest summer days, insulation's job is different... it must keep the heat out. How can one product do both? It's easy to understand once you grasp the simple concept of heat transfer.

 

This daily occurrence takes its toll on the best of buildings if not suitably and adequately protected against the ravaging nature.

 

Heat flows naturally from a warmer to a cooler space. In winter, the heat moves directly from all heated living spaces to the outdoors and to adjacent unheated attics, garages, and basements - wherever there is a difference in temperature. During the summer, heat moves from outdoors to the house interior. To maintain comfort, the heat lost in winter must be replaced by your heating system and the heat gained in summer must be removed by your air conditioner.

 

WHY INSULATE

Heating and cooling account for 50 to 70% of the energy used in an average home. Inadequate insulation and air leakage are leading causes of energy waste in most homes.

 

• Reduce the consumption of electrical energy up to 40% during the cooling process inside the building.
• Increases the level of comfort for the inhabitants in a building as it provides a cooler interior ambience.
• The usage of AC is minimized. This helps to reduce the cost of power consumption.
• Protects the building materials from the constant fluctuations in temperature thereby helping to enhance the expected life of the building.
• Reduces environment pollution and the heat transmitted into the buildings.
• Helps in preserving the national limited energy resources.
• Thermally Insulated buildings have less noise pollution from the AC's & chiller rooms as also from the noise penetrating from outside.

BITUMAT BITUTHERM

Produced in Dammam Saudi Arabia using the latest computerized state of the art technology, Bitumat BituTherm Extruded Polystyrene panels are specially formulated to suit the very harsh Middle Eastern climatic conditions. Bitumat BituTherm is an intelligent way to insulate a building.

Bitumat uses the most sophisticated German know how to ensure that the product is consistent, water resistant, reliable and able to maintain its high R Value for long periods. Bitumat BituTherm boards are made in a continuous skin surface & developed into a closed cell structure. Bitumat BituTherm complies with BS EN 13164-2001.

 

The blended polystyrene polymer compound is heated, put through an extrusion process & exposed to normal atmospheric conditions so that the material will expand. XPS is available in several different densities and has an R-value at 75ºF (24ºC) of about 5 per inch (25mm) of thickness.

We are looking for queries only from Ghaziabad, Uttar Pradesh.

 

We ar supplier of Cico Flortop- Rtu. Cico Flortop- Rtu is a ready-to-use factory processed and specially graded nonoxidising, non-metallic and mineral aggregate dry shake surface hardener free from oil and grease.

TECHNICAL DATA Colour Grey , off white, pastel green brick red , terracotta Abrasion Resistance 300 %(minimum) as compare to reference sample Moh Scale Hardness 8 (minimum) Compressive Strength 60 N/mm

Our enterprise has gained immense recognition in offering optimum quality Cebex 100. used in different constructional applications, the offered product is examined on various quality parameters before delivering in the market. In addition to this, the offered product is made available with us at rock bottom prices.

Features:

• Easy to use
• Highly effective
• Long lasting results
• Fast results

We offer Pypkote from IWL INDIA LTD. thickness 2mm 4mm. Pypkote 2 mm is a Pipeline Corrosion Resistant Tape Confirming to IS 10221 Appendix B Specification. It Comprises of a tar based polumeric mix supported on a film of high tensile strength HMHDPE. The Polymeric mix is specially manufactured to have properties of high softening point, high penetration and high resistance to ageing. Tape is terminated on both exteriors by thermo fusible HMHDPE Films which aids in the installation process.

Our firm is enlisted as one of the renowned name in offering high quality Nitobond. Sourced from reliable vendors, it is used for different constructional applications. It is high on demand among patrons due to its embellished features. Tested on various quality parameters, our products are available at economical rates to the clients.

Features:

• Quick results
• Long lasting effect
• Easy to use
• Highly effective

In a zest to attain maximum client satisfaction, we are engaged in offering Conplast SP 430 to our customers. These are used in various constructional applications. Sourced from authorized vendors, these products are used for different constructional applications. For processing of these products, our vendors make use of latest machinery and advanced technology.

Features:

• Easy to use
• Thermal stability
• Long lasting results
• Impact resistant

Years of understanding of this domain has helped us in providing our customers with the best quality of Conbextra GP-2. Used in different constructional applications , these products are procured from reliable vendors of this domain. Being a quality focused name, the quality of these products is never compromised at our end.

Features:

• Highly effective
• Compositional accuracy
• Easy to use
• Longer shelf life

Adesilex PG2 SP

Keeping the track of latest happening of this domain, we are instrumental in offering the best quality of Bitumen Emulsion. Procured from reliable vendors, these products are used in different constructional applications. Owing to their resistance against impact, high effectiveness and enhanced shelf life, these products are highly demanded.

Features:

• Easy to use
• Optimum effectiveness
• Accurate composition
• Longer shelf life

One of the best ways to make it workable is to emulsify it with water to obtain Bitumen emulsion which is workable in wide range of temperatures. Emulsion is defined as a mixture of two immiscible liquids one of which is dispersed in the other in the form of very fine particle. The process of emulsification is accomplished by use of an emulsifier and a stabilizer. A Colloid mill is generally used for preparation of emulsion

Color: ANY
Brand: TRADING

We are the leading importers of bitumen grade : 85/25,90/15,60/70,80/100 From IRAN,SAUDI ARABIA,UAE.